Denon AVR-3310CI Owner's Manual page 49

Input Assignments Menu Operations
n
1
Press MENU .
The GUI menu is displayed on the TV
screen.
Use the to select "Input Setup",
ui
ENTER
the press or .
p
2
Select "Input Assign", then press
ENTER or .
p
The "INPUT ASSIGN" screen is displayed.
3
Use to move the orange
uio p
highlight to the item you want to set.
Main remote control
operation buttons
4
Press ENTER, then use
o p
the input terminal to be assigned.
5
Press ENTER to enter the setting.
:Displaying the menu :Moves the cursor
Cancel the menu (Up/Down/Left/Right)
Setting items
HDMI
to select
Set this to change the HDMI
input terminals assigned to
the input sources.
Digital
Set this to change the digital
input terminals assigned to
the input sources.
:Confirm the setting
Making the Input Settings (Input Setup)
Setting contents
The DVD HDP TV SAT/CBL VCR
are assigned to the HDMI input terminals as shown below.
HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5
None : Do not assign an HDMI input terminal to the selected input
source.
Upon purchase, the settings of the different input sources are as shown
b
below.
SAT/
Input
DVD HDP TV
source CBL
Default HDMI HDMI HDMI
None
setting 1 2 3
• An input source to which an HDMI input terminal cannot be assigned is
displayed as "– – –".
• To play the video signal assigned at "HDMI" combined with the audio
signal assigned at "Input Assign" – "Digital", select "Digital" at "Input
Mode" (vpage 49).
• When the AVR-3310CI and monitor are connected with an HDMI cable,
if the monitor is not compatible with HDMI audio signal playback, only
the video signals are output to the monitor.
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the monitor.
• When control dock for iPod is used as the input source, assignment of
the HDMI input terminal is disabled, even if it is assigned.
• When "HDMI Control" (vpage 36) is set to "ON", HDMI input terminal
cannot be assigned to "TV".
CD DVD HDP TV SAT/CBL VCR
The
input sources are assigned to the digital input terminals as shown below.
Coax 1 (Coaxial) / Coax 2 / Coax 3 / Opt 1 (Optical) / Opt 2 / Opt 3
None : Do not assign a digital input terminal to the selected input source.
:Return to previous menu
DVR V.AUX input sources
VCR DVR V.AUX
HDMI HDMI
None
4 5
DVR V.AUX SIRIUS
See overleaf