Playback; Important Information; Playing Components; Playing A Blu-Ray Disc Player/Dvd Player - Denon AVR-3310CI Owner's Manual

Playback

Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
[DVD]
[iPod]
[SOURCE
SELECT]
[DEVICE
SELECT 1]
[DEVICE
SELECT 2]
Front

Important Information

Before starting playback, make the connections between the different
BUTTON
components and the settings on the receiver.
<BUTTON>
NOTE
[BUTTON]
• Also refer to the operating instructions of the connected components
when playing them.
• External devices can be controlled by remote control unit (vpage
86 "Operating the Connected Devices by Remote Control Unit").
[iPod]

Playing Components

[DVD]

Playing a Blu-ray Disc Player/DVD Player

The following describes the procedure for playing Blu-ray disc player /
DVD player. Use the same procedure to play other components.
1
Playback preparation.
q Turn on the power of the TV, subwoofer and player.
w Switch the TV's input to the AVR-3310CI.
e Load the disc in the player.
2
Turn the AVR-3310CI power on.
(vpage 24 "Turning the Power On")
3
[SOURCE SELECT]
Press
Display the "SOURCE SELECT" menu (vpage 27).
4
Play the component connected to the AVR-3310CI.
Rear
Make the necessary settings on the player (language setting,
subtitles setting, etc.) beforehand.
5
Adjust the items below.
Adjusting the master volume
n
n Selecting the surround mode
Adjusting the Sound and Picture Quality
n
(vpage 71)
iPod ® Playback
When a DENON control dock for iPod (ASD-1R or ASD-11R, sold
separately) is used, you can play images and music stored on an
iPod ® .
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries.
b The iPod may only be used to copy or play contents that are not
copyrighted or contents for which copying or playback is legally
permitted for your private use as an individual. Be sure to comply
with applicable copyright legislation.
Listening to music on an iPod ®
1
Playback preparation.
q Connecting the DENON control dock for iPod to the AVR-
w Set the iPod ® in the DENON control dock for iPod.
e Set
2
Turn the AVR-3310CI power on.
(vpage 24 "Turning the Power On")
3
Press
Select menu, then select "
The input source switches to the source to which the control
and select the input source.
dock for iPod is assigned and the iPod menu is displayed.
(vpage 67)
(vpage 69)
(When using an ASD-1R)
When using an ASD-11R, the "Music" and "Videos" folders are
b
displayed on the top menu.
b Once communications between the AVR-3310CI and the iPod are
completed, the connections screen is displayed on the iPod.
If the connections screen is not displayed, the iPod may not be
b
properly connected. Reconnect it.
3310CI (vpage 16 "Control Dock for iPod").
[DEVICE SELECT 1] [DEVICE SELECT 2]
to "MAIN/TV"
"MAIN".
[SOURCE SELECT]
to display the GUI Source
" (vpage 27).
– GUI screen –
(When using an ASD-11R)
See overleaf
to