Connecting The Playback Components - Denon AVR-3310CI Owner's Manual

Connecting the Playback Components

Blu-ray Disc Player / DVD Player
Select the terminal to use and connect the device.
For instructions on HDMI connections, see "Connecting Devices Equipped with HDMI Terminals" on page 14.
Blu-ray Disc player / DVD player
Set as Necessary
Set this to change the input signal to which the input source is
assigned.
"Input Assign" (vpage 45)
L R
L R
NOTE
In the case of HD audio (Dolby TrueHD, DTS-HD and Dolby Digital Plus
and DTS Express) audio playback, connect with HDMI (vpage 14,
"Connecting Devices Equipped with HDMI Terminals").
Control Dock for iPod
Use a DENON control dock for iPod (ASD-1R or ASD-11R, sold
separately) to connect the iPod to the AVR-3310CI. For instructions on
the control dock for iPod settings, refer to the control dock for iPod's
operating instructions.
Control dock for iPod
R L
R L
Set as Necessary
Set other than when iPod is assigned to the VCR (iPod) terminal.
"Input Assign" – "iPod dock" (vpage 47)
With the default settings, the iPod can be used connected to the VCR
(iPod) connector.
Connecting Devices