Adjusting The Picture Quality (Picture Adjust) - Denon AVR-990 Owner's Manual

ENGLISH
Adjusting the Sound and Picture Quality (Audio/Video Adjust)
Setting items
RESTORER OFF : Do not use RESTORER.
Mode 1 (RESTORER 64) : Optimized mode for compressed sources with
This function restores
compressed audio signals very weak highs.
Mode 2 (RESTORER 96) : Apply suitable bass and treble boost for all
to how they were before
compressed sources.
compression and corrects the
Mode 3 (RESTORER HQ) : Optimized mode for compressed sources with
sense of volume of the bass
normal highs.
and treble to obtain richer
playback sound.
• This can be set with analog signals or when a PCM signal (fs = 44.1/48
kHz) is input.
• This cannot be set when the input mode is set to "EXT. IN" or when the
surround mode is set to "DIRECT".
• The default setting for "iPod" and "NET/USB" are "Mode3". All others
are set to "OFF".
• When set to something other than "OFF", "
• This can also be set by pressing
• Such compressed audio formats as MP3, WMA (Windows Media Audio)
and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The RESTORER
function generates the signals eliminated upon compression, restoring
the sound to conditions near those of the original sound before
compression. It also corrects the sense of volume of the bass to obtain
richer sound with compressed audio signals.
• This is displayed on the GUI menu and can be set when the input source
is set to "HD Radio" or "NET/USB", or when analog signals (including
FM/AM signals) or PCM signals (fs = 44.1/48 kHz) are input.
Audio Delay 0ms ~ 200ms
While viewing video,
manually adjust the time to
• This can be set within the range of 0 to 100 ms when "Auto Lip
delay audio output.
Sync" is set to "ON" and when a TV compatible with Auto Lipsync is
connected.
• Store "Audio Delay" for each input source.
• You can also press

Remote control operation
buttons
Setting contents
" is displayed.
RESTORER
during playback.
OFF Mode 1 Mode 2
(RESTORER 64) (RESTORER 96)
Mode 3
(RESTORER HQ)
About the RESTORER function
<AUDIO DELAY>
to set.
:Displaying the menu
Cancel the menu

Adjusting the Picture Quality (Picture Adjust)

• This can be set when the input source is DVD
With input sources other than the ones above, this can be set when "Video Select" is selected. In this
b
case, the original input source settings are called out.
• Can be set when the "Video Convert" setting (vpage 47) is "ON".
Setting items
Contrast
Adjust picture contrast.
Brightness
Adjust picture brightness.
Chroma Level
Adjust picture chroma level
(saturation).
Hue
Adjust color hue.
DNR
Reduce overall picture
noise.
Enhancer
Emphasize picture contours.
• "DNR" and "Enhancer" are each effective with HDMI output.
• The value set at "Picture Adjust" is stored in the memory individually for each input source.
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Default settings are underlined.
HDP TV SAT/CBL VCR
Setting contents
–6 ~ +6 (0)
0 ~ +12
–6 ~ +6 (0)
–6 ~ +6 (0)
OFF / Low / Middle / High
0 ~ +12
:Return to previous menu
DVR V.AUX NET/USB .