Denon AVR-3310CI Owner's Manual page 45

Setting items
Source Delete PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX / NET/
USB / SIRIUS / HD Radio : Select input source that is not used.
Remove input sources
that are not used from the • ON : Use this source.
• Delete : Do not use this source.
display.
NOTE
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Delete" cannot be selected using
SELECT
.
GUI Screensaver : Make screensaver settings.
Make GUI related settings. • ON : The screen saver is activated during GUI menu display or NET/USB
/ iPod / SIRIUS / HD Radio screen display if no operation is performed
approximately for a continuous 3-minute period. When you press
p
, the screen saver is cancelled and the screen before that screen saver
started is displayed.
• OFF : Screen saver is not activated.
Wall Paper : Set wallpaper to display the background when playback is
stopped, etc.
• Picture : Set the background to a picture (DENON logo).
• Black : Set the background to black.
Format : Set the video signal format to be output for the TV you are
using.
• NTSC : Select NTSC output.
• PAL : Select PAL output.
The "Format" can also be set by the following procedure. However,
the GUI screen is not displayed.
1. Press and hold the
seconds.
"Video Format" appears on the display.
2. Press o p
3. Press the
setting.
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Text : Display the content of operation during switching of surround mode,
input mode, etc.
• ON : Turn display on.
• OFF : Turn display off.
Main remote control
operation buttons
Setting contents
<AUDIO DELAY> <RETURN>
and for at least 3
and set the video signal format.
<ENTER> <MENU> <RETURN>
, or to complete the
:Displaying the menu :Moves the cursor
Cancel the menu (Up/Down/Left/Right)
Setting items
GUI Master Volume : Master volume display during adjustment.
•
(Continued)
•
•
SOURCE
NET/USB : Set the NET/USB screen display time when the input source
is "NET/USB".
•
•
•
uio
•
iPod : Set the iPod screen display time when the input source is "iPod".
•
•
•
•
Tuner : Set the tuner screen display time when the input source is
"SIRIUS" or "HD Radio".
•
•
•
•
Quick Select Name
1. Use
Change the "Quick Select"
display title to one you
2. Use
prefer.
3. Use
4. Repeat steps 1 ~ 3 to change the display name.
:Confirm the setting
Making Detailed Settings (Manual Setup)
Setting contents
Bottom : Display at the bottom.
Top : Display at the top.
OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
Always : Show display continuously.
30s : Show display for 30 seconds after operation.
10s : Show display for 10 seconds after operation.
OFF : Turn display off.
Always : Show display continuously.
30s : Show display for 30 seconds after operation.
10s : Show display for 10 seconds after operation.
OFF : Turn display off.
Always : Show display continuously.
30s : Show display for 30 seconds after operation.
10s : Show display for 10 seconds after operation.
OFF : Turn display off.
ui to select the name of the Quick Select setting you want to
ENTER
p
change, then press or .
o p to set the cursor to the character you want to change.
ui to change the character, then press
• Up to 16 characters can be input.
• You can change the character type when you press
character input.
• The types of characters that can be input are as shown below.
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GSymbolsH ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜
(Space)
GNumbersH 0123456789
:Return to previous menu
ENTER.
[SEARCH]
during
See overleaf