Playback - Denon AVR-3310CI Owner's Manual

Denon avr-3310ci: user guide
Hide thumbs Also See for AVR-3310CI:
Table of Contents

Advertisement

Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
<ZONE2 ON/OFF>
<SOURCE SELECT>
<ZONE3 ON/OFF>
<ZONE2/3 / REC SELECT> <POWER>
QUICK SELECT
[INPUT
SOURCE
SELECT]
[VOLUME]
[MUTE]
Front
[M.ZONE CALL]
Sub remote control unit


Playback

The operating procedure is the same for "q Zone Playback by Speaker
BUTTON
Output" and "w Zone Playback by Audio Output (PRE OUT)".
<BUTTON>
1
Press
<POWER>
[BUTTON]
2
Turn on the zone power.
<MASTER VOLUME>
<ZONE2 ON/OFF>
P ress
zone to be operated.
When the power turns on, the "
on the display.
Operation on the remote control unit
S et the main remote control unit's
q
shown on below.
QUICK SELECT
[ZONE ON]
[MAIN OFF]
[MAIN ON]
[ZONE ON]
P ress
w
When the power turns on, the "
[INPUT
on the display.
SOURCE
SELECT]
[INPUT SOURCE SELECT]
b
Also press
power turns on.
When using ZONE2 or ZONE3, it is possible to turn the power for
b
the MAIN ZONE only on or off by pressing
OFF]
.
3
Select the input source.
<ZONE2/3/ REC SELECT>
P ress
q
be adjusted.
<SOURCE SELECT>
T urn
w
Operation on the remote control unit
Rear
I n the zone mode you want to operate, press
SOURCE SELECT]
b
The same input source as in the main zone can be selected easily
by pressing the
.
Operation on the main unit
<ZONE3 ON/OFF>
or
for the
" or "
" indicator lights
[DEVICE SELECT]
.
" or "
" indicator lights
when in standby mode, the
[MAIN ON]
[MAIN
or
Operation on the main unit
and select the zone to
to choose the input source.
[INPUT
.
[M.ZONE CALL]
on the sub remote control unit.
4
Adjust the item below.
Adjust the Volume
n
Operation on the main unit
<ZONE2/3/ REC SELECT>
P ress
and select the zone
q
to be adjusted.
<MASTER VOLUME>
T urn
to adjust.
w
Operation on the remote control unit
I n the zone mode whose volume you want to adjust,
[VOLUME]
press
.
G Adjustable rangeH – – –
–80dB ~ –40dB ~ 18dB
(When the "Volume Display" setting is "Relative")
GAdjustable rangeH 0 ~ 41 ~ 99
(When the "Volume Display" setting is "Absolute")
b
Upon purchase, "Volume Limit" is set to "-10dB (71)".
n
Turning off the Sound Temporarily (MUTE)
I n the zone mode for which you want to mute the
[MUTE]
sound, press
.
The sound is reduced to the level set at menu "Mute Level"
(vpage 41).
To cancel, either adjust the volume or press
b
The setting is canceled when the zone's power is turned off.
b
[MUTE]
again.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents