Denon AVR-3310CI Owner's Manual page 47

Setting items
Firmware Update Check for Update : You can check for firmware updates. You can also
check approximately how long it will take to complete an update.
Update the firmware of the
receiver.
Start : Execute the update process.
When updating starts, the power indicator becomes red and the GUI
screen is shut down. The amount of update time which has elapsed is
displayed.
When updating is complete the power indicator becomes green and
normal status is resumed.
If updating fails, the set automatically retries, but if updating is still not
b
possible, one of the messages shown below is displayed. If the display
reads as shown below, check the settings and network environment,
then update again.
Display
Updating failed
Login failed
Server is busy
Connection fail
Download fail
Add New Feature Upgrade : Execute the upgrade process.
When updating starts, the power indicator becomes red and the GUI
Display the new functions
screen is shut down. The amount of update time which has elapsed is
(payment required) which
can be purchased for displayed.
When updating is complete the power indicator becomes green and
downloading to the AVR-
normal status is resumed.
3310CI and upgrade.
When you purchase a
b If the upgrade is not successful, an error message identical to those in
new function and register
"Firmware Update" will appear on the display, check the settings and
your user information,
network environment, then update again.
"Registered" is displayed
Upgrade Status : A list of the additional functions provided by the Upgrade
on this menu and you can
will be displayed.
proceed with the upgrade.
When "Not Registered" is displayed on the Add New Feature screen,
you cannot upgrade.
To use the upgrade function, you should purchase an upgrade package
from the DENON website.
To purchase the package, you will need the ID number shown on this
screen.
To display the ID number on the screen, hold
down for 3 seconds or more.
Main remote control
operation buttons
Setting contents
Description
Updating failed.
Failure to log into server.
Server is busy. Wait a while then try again.
Failure connecting to server.
Downloading of the firmware has failed.
<p> <STATUS>
and
:Displaying the menu :Moves the cursor
Cancel the menu (Up/Down/Left/Right)
Notes concerning use of "Firmware Update" and "Add New Feature"
• In order to use these functions, you must have the correct system requirements and settings for a
broadband Internet connection.
• Do not turn off the power until updating or upgrating is completed.
• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/
upgrading procedure to be completed.
Once updating/upgrading starts, normal operations on the AVR-3310CI cannot be performed until
updating/upgrading is completed.
Furthermore, updating/upgrading the firmware may reset the backup data for the parameters, etc., set
for the AVR-3310CI.
• The following backup data may be erased after an update or upgrade.
Internet radio preset channel
•
Internet radio Recently Played data
•
Care of data in Internet radio, media server and USB memory device
•
• In the event of an update error during update or upgrade, turn the AVR-3310CI's power off and then on
again. "Update Retry" appears on the display and update restarts from the point at which update failed.
If the error continues despite this, check the network environment.
• Information regarding the "Firmware Update" function and "Add New Feature" will be announced on
the DENON web site each time related plans are defined.
• When usable new firmware is released with "Firmware Update" or "Add New Feature", a notification
message is displayed on the GUI screen. When you do not want to be notified, set "Update Notification"
(vpage 40) and "Upgrade Notification" (vpage 40) to "OFF".
:Confirm the setting
Making Detailed Settings (Manual Setup)

:Return to previous menu