Denon AVR-3310CI Owner's Manual page 51

Making the Video Settings (Video)
Setting items
Video Select SOURCE : Play the picture and sound of the input source.
DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video input
Change video input to your
preferred input source. source to view. This can be set for individual input sources.
Set by either pressing
SELECT]
on the main remote control.
• When operating from the main remote control unit
[VIDEO SELECT]
Press
displayed.
To cancel, press
• When operating from the main unit
After pressing
SELECT>
on the main unit until the picture you want to see is displayed.
To cancel, press
select "SOURCE".
NOTE
• It is not possible to select HDMI input signals.
• The video select function does not work with HDMI signals.
• Input sources for which "Delete" is selected at "Source Delete"
(vpage 42) cannot be selected.
Video Convert
This can be set when the input source is DVD
The input video signal is
VCR DVR
converted automatically in
ON : The input video signal is converted.
function of the connected
OFF : The input video signal is not converted.
TV (vpage 10 "Converting
Input Video Signals for
Output (Video Conversion
• When a non-standard video signal from a game machine or some other
Function)").
source is input, the video conversion function might not operate. In this
case set "Video Convert" to "OFF".
• When "Video Convert" is set to "OFF", the video conversion function
does not work. In this case, connect the AVR-3310CI and TV with the
same type of cable.
Main remote control
operation buttons
Default settings are underlined.
Setting contents
<VIDEO SELECT>
on the main unit or
repeatedly until the picture you want to see is
[VIDEO SELECT]
, and select "SOURCE"
<VIDEO SELECT>
on the main unit, turn the
<VIDEO SELECT> <SOURCE SELECT>
, then turn
HDP TV
V.AUX .
:Displaying the menu
Cancel the menu
Setting items
i/p Scaler
The input source's resolution
is converted to the resolution
set at "Resolution".
[VIDEO
Resolution
Set resolution of the video
signal output to HDMI.
<SOURCE
and
SAT/CBL
Progressive Mode
Select optimum progressive
mode for video material.
Aspect
Set the aspect ratio for the
video signals output to the
HDMI.
:Moves the cursor
:Confirm the setting
(Up/Down/Left/Right)
Making the Input Settings (Input Setup)
Setting contents
This can be set when the input source is DVD
VCR DVR V.AUX NET/USB .
Analog : Use i/p scaler function for analog video signal.
Analog & HDMI : Use i/p scaler function for analog and HDMI video
signal.
OFF : Do not use i/p scaler function.
• This can be set when "Video Convert" is set to "ON".
• "Analog & HDMI" can be set for input sources for which an HDMI input
terminal is assigned.
• When "i/p Scaler" is set to "Analog & HDMI", it has no effect on the x.v.
Color signal or computer resolutions.
This can be set when the input source is DVD
VCR DVR V.AUX NET/USB .
Auto : The number of pixels the TV connected to the HDMI output terminal
supports is detected automatically and the appropriate output resolution
is set.
480p/576p / 1080i / 720p / 1080p / 1080p:24Hz : Set the output resolution.
• This can be set when "i/p Scaler" is set to anything other than "OFF".
• When "i/p Scaler" is set to "Analog & HDMI", the resolution of both the
analog video input signal and HDMI input signal can be set.
• To watch 1080p/24Hz pictures, use a TV that supports 1080p/24Hz video
signals.
• When set to "1080p/24Hz", you can enjoy film-like pictures for film
sources (in 24 Hz). For video sources and mixed sources, we recommend
setting the resolution to "1080p".
• It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output
at a resolution of 1080p/50Hz.
This can be set when the input source is DVD
VCR DVR V.AUX .
Auto : The video material is automatically detected and the appropriate
mode is set.
Video 1 : Select mode suitable for video playback
Video 2 : Select mode suitable for video and 30-frame film material playback.
This can be set when "i/p Scaler" is set to anything other than
"OFF".
This can be set when the input source is DVD
VCR DVR V.AUX NET/USB .
Full : Output at 16:9 aspect ratio.
Normal : Output at 4:3 aspect ratio.
This can be set when "i/p Scaler" is set to anything other than
"OFF".
:Return to previous menu
HDP TV SAT/CBL
HDP TV SAT/CBL
HDP TV SAT/CBL
HDP TV SAT/CBL