Multicast Configuration Example (In Multicast Control Mode) - 3Com S7906E Configuration Manual

S7900e family release 6600 series

Hide thumbs Also See for S7906E:

Command reference manual (2327 pages)

Getting started manual (155 pages)

Datasheet (8 pages)

Table of Contents

[Sysname-ftth] multicast vlan-id 1002 dest-ip 225.1.2.1 to 225.1.2.255

[Sysname-ftth] multicast vlan-id 1003 dest-ip 225.1.3.1 to 225.1.3.255

[Sysname-ftth] quit

# Enable IGMP snooping globally.

[Sysname] igmp-snooping

[Sysname-igmp-snooping] quit

# Enable IGMP snooping in VLAN 1002 and VLAN 1003.

[Sysname] vlan 1002

[Sysname-vlan1002] igmp-snooping enable

[Sysname-vlan1002] quit

[Sysname] vlan 1003

[Sysname-vlan1003] igmp-snooping enable

[Sysname-vlan1003] quit

# Configure the multicast mode of the ONU as IGMP snooping.

[Sysname-Onu3/0/1:1] multicast-mode igmp-snooping

# Assign UNI 1 to multicast VLAN 1002 and UNI 2 to multicast VLAN 1003, and configure the ONU as a

Trunk port (to allow the packets of all the VLANs to pass through the port).

[Sysname-Onu3/0/1:1] uni 1 multicast vlan 1002

[Sysname-Onu3/0/1:1] uni 2 multicast vlan 1003

[Sysname-Onu3/0/1:1] port link-type trunk

# Configure UNI 1 and UNI 2 to remove the multicast VLAN tags from downlink multicast packets.

[Sysname-Onu3/0/1:1] uni 1 multicast-strip-tag enable

[Sysname-Onu3/0/1:1] uni 2 multicast-strip-tag enable

[Sysname-Onu3/0/1:1] quit

# Configure the link type of OLT 3/0/1 as hybrid, allow the packets of VLAN 1002 and VLAN 1003 to

pass through OLT 3/0/1, and add tags to the VLAN 1002 and VLAN 1003 packets sent by OLT 3/0/1.

[Sysname] interface olt 3/0/1

[Sysname-Olt3/0/1] port link-type hybrid

[Sysname-Olt3/0/1] port hybrid vlan 1002 1003 tagged

# Configure Ethernet 2/0/1 as a Trunk port, and permit the packets of VLAN 1002 and VLAN 1003 to

[Sysname] interface Ethernet2/0/1

[Sysname-Ethernet2/0/1] port link-type trunk

[Sysname-Ethernet2/0/1] port trunk permit vlan 1002 1003