Multicast Volume - 3Com S7906E Configuration Manual

Features
IPv6 OSPFv3
IPv6 IS-IS
IPv6 BGP
Routing Policy
Policy Routing

Multicast Volume

Table 2-4 Features in Multicast volume
Features
Multicast Overview
Multicast Routing and
Forwarding
OSPFv3 is OSPF version 3 for short, supporting IPv6 and compliant with
RFC2740 (OSPF for IPv6). This document describes:
Enabling OSPFv3
Configuring OSPFv3 Area Parameters
Configuring OSPFv3 Network Types
Configuring OSPFv3 Routing Information Control
Tuning and Optimizing OSPFv3 Networks
The IS-IS routing protocol supports multiple network protocols, including
IPv6. IS-IS with IPv6 support is called IPv6 IS-IS dynamic routing
protocol. This document describes:
Configuring IPv6 IS-IS Basic Functions
Configuring IPv6 IS-IS Routing Information Control
To support multiple network layer protocols, IETF extended BGP-4 by
introducing IPv6 BGP. This document describes:
Configuring IPv6 BGP Basic Functions
Controlling Route Distribution and Reception
Configuring IPv6 BGP Route Attributes
Tuning and Optimizing IPv6 BGP Networks
Configuring a Large Scale IPv6 BGP Network
Routing policy is used on the router for route inspection, filtering,
attributes modifying when routes are received, advertised, or
redistributed. This document describes:
Defining Filters
Route policy configuration
Policy routing is to make forwarding decisions based on user-defined
policies. Different from the normal destination-based routing, policy
routing can make routing decisions based on the source address and
other criteria in addition to the destination IP address.
The S7900E series switches implement policy routing through QoS
policies. For details about traffic classification, traffic behavior and QoS
policy configuration commands, refer to QoS Commands in the QoS
Volume.
This document describes the main concepts in multicast:
Introduction to Multicast
Multicast Models
Multicast Architecture
Multicast Packets Forwarding Mechanism
Multi-Instance Multicast
Multicast routing and forwarding refer to some policies that filter RPF
routing information for IP multicast support. This document describes:
Multicast routing and forwarding overview
Multicast routing and forwarding configuration
2-6
Description
Description