Displaying And Maintaining Alarm Configurations - 3Com S7906E Configuration Manual

Displaying and Maintaining Alarm Configurations

To do...
Display the configuration
information in FTTH view, OLT
port view, or ONU port view
Display the configuration
information in the current view
Display alarm event records
Use the display this command to display the configuration in the current view. To display the
alarm configurations in FTTH view, OLT port view, or ONU port view, you need to enter the
corresponding view.
Table 5-1 shows the relations between the views in which alarms are configured and the views in
which alarm configurations are displayed.
For details about the display trapbuffer command, see the part discussing information center in
the command manual.
Table 5-1 Relations between the alarm command configuration views and alarm configuration display
views
Alarm command
configuration view
FTTH view
OLT port view
ONU port view
FTTH view
OLT port view
OLT port view
Use the command...
display current-configuration
[configuration ftth | interface
interface-type
interface-number ]
display this
display trapbuffer [ reverse ]
[ size buffersize ]
Alarm configuration display
view
ONU port view
OLT port view
5-13
Remarks
Available in any view
Available in the current view
Available in any view
Remarks
For an alarm configuration
command available in any of
the three views, you can use
the display this command in
ONU port view to display the
alarm configuration.
For an alarm configuration
command available in FTTH
view and OLT port view, you
can use the display this
command in OLT port view
to display the
configuration.
For an alarm configuration
command available in OLT
port view only, you can use
the display this command
in OLT port view to display
the alarm configuration.
alarm