3Com S7906E Configuration Manual page 885

[SwitchB-Vlan-interface300] ospfv3 2 area 2
[SwitchB-Vlan-interface300] quit
# Enable OSPFv3 process 2 on Switch C.
<SwitchC> system-view
[SwitchC] ipv6
[SwitchC] ospfv3 2
[SwitchC-ospfv3-2] router-id 4.4.4.4
[SwitchC-ospfv3-2] quit
[SwitchC] interface vlan-interface 300
[SwitchC-Vlan-interface300] ospfv3 2 area 2
[SwitchC-Vlan-interface300] quit
[SwitchC] interface vlan-interface 400
[SwitchC-Vlan-interface400] ospfv3 2 area 2
[SwitchC-Vlan-interface400] quit
# Display the routing table of Switch C.
[SwitchC] display ipv6 routing-table
Routing Table :
Destinations : 6
Destination: ::1/128
NextHop : ::1
Interface : InLoop0
Destination: 3::/64
NextHop : 3::2
Interface : Vlan300
Destination: 3::2/128
NextHop : ::1
Interface : InLoop0
Destination: 4::/64
NextHop : 4::1
Interface : Vlan400
Destination: 4::1/128
NextHop : ::1
Interface : InLoop0
Destination: FE80::/10
NextHop : ::
Interface : NULL0
3) Configure OSPFv3 route redistribution
# Configure OSPFv3 process 2 to redistribute direct routes and the routes from OSPFv3 process 1 on
Switch B.
[SwitchB] ospfv3 2
Routes : 6
1-25
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0