Creating A Local Mirroring Group; Configuring Mirroring Ports For The Local Mirroring Group - 3Com S7906E Configuration Manual

Creating a Local Mirroring Group

Follow these steps to create a local mirroring group:
To do...
Enter system view
Create a local mirroring group
A local mirroring group takes effect only after you configure a monitor port and mirroring port for it.

Configuring Mirroring Ports for the Local Mirroring Group

You can configure a list of mirroring ports for a mirroring group at a time in system view, or assign only
the current port to it as a mirroring port in interface view. To assign multiple ports to the mirroring group
as mirroring ports in interface view, repeat the step.
Configuring mirroring ports in system view
Follow these steps to configure mirroring ports for a local mirroring group in system view:
To do...
Enter system view
Configure mirroring ports
Configuring a mirroring port in interface view
Follow these steps to configure a mirroring port for a local mirroring group in interface view:
To do...
Enter system view
Enter interface view
Configure the current port as a
mirroring port
A mirroring group can contain multiple mirroring ports.
Use the command...
system-view
mirroring-group group-id local
Use the command...
system-view
mirroring-group group-id
mirroring-port
mirroring-port-list { both |
inbound | outbound }
Use the command...
system-view
interface interface-type
interface-number
[ mirroring-group group-id ]
mirroring-port { both |
inbound | outbound }
1-5
Remarks
—
Required
Remarks
—
Required
By default, no mirroring port is
configured for a mirroring
group.
Remarks
—
—
Required
By default, a port does not
serve as a mirroring port for any
mirroring group.