Vlan Mapping Configuration Examples; One-To-One/Many-To-One Vlan Mapping Configuration Example - 3Com S7906E Configuration Manual

To do...
Map the original SVLAN and
CVLAN to the new SVLAN by
associating the traffic class with
the traffic behavior
Exit to system view
Table 1-7 Configure a downlink policy for the downlink port
To do...
Enter system view
Create a class and enter class
view
Specify the new CVLAN for the
VLAN mapping
Specify the new SVLAN for the
VLAN mapping
Exit to system view
Create a traffic behavior and
enter traffic behavior view
Specify the original CVLAN
used for replacing the new
CVLAN
Specify the original SVLAN
used for replacing the new
SVLAN
Exit to system view
Create a QoS policy and enter
QoS policy view
Map the new CVLAN and
SVLAN to the original CVLAN
and SVLAN by associating the
traffic class with the traffic
behavior
Exit to system view

VLAN Mapping Configuration Examples

One-to-One/Many-to-One VLAN Mapping Configuration Example

Network requirements
In the scenario presented in
service traffic from Switch C at the campus network edge while isolating the traffic of a home user from
the traffic of all other home users in the VLAN.
Use the command...
classifier tcl-name behavior
behavior-name
quit
Use the command...
system-view
traffic classifier tcl-name
[ operator { and | or } ]
if-match customer-vlan-id
vlan-id-value
if-match service-vlan-id
vlan-id-value
quit
traffic behavior
behavior-name
remark customer-vlan-id
vlan-id-value
remark service-vlan-id
vlan-id-value
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
quit
Figure 1-2, to save VLAN resources, use one VLAN to carry a type of
1-15
Remarks
Required
—
Remarks
—
Required
Required
Required
—
Required
Required
Required
—
Required
Required
—