Transferring Tag And Comment Data - Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manual

Transferring Tag and Comment Data

Data Transfer to Inner Flash Memory
1, 2, 3...
Memory Card
Downloading LCU/LCB Elements
1, 2, 3...
Transferring Data to the
Memory Card
310
2. Download the LCU/LCB elements.
3. Click the Start Button and data will automatically be transferred to the inner
flash memory after the function block data is transferred.
1. Select Transfer to LC - Transfer tag info from the Execute Menu. Data will
be transferred to the inner flash memory.
Note The following dialog box will be displayed when the functions groups have been
downloaded.
Note To download functions after adding or deleting function blocks be sure to click
the OK Button to transfer the tag information to the internal flash memory. If the
tag information is not transferred to the internal flash memory, block diagrams
will become corrupted when a new upload is performed and may be deleted.
1. Select the LCU/LCB element in the Project Workspace Area.
2. Download the LCU/LCB element.
3. The following dialog box will be displayed.
4. Click the Option Button and make sure that the
Card option is selected. This option is normally selected by default when the
Memory Card is installed.
5. Click the Start Button. Function block data will be automatically transferred
to the Memory Card after being downloaded.
Select Transfer to LC – Memory Card from the Execution Menu to transfer data
to the Memory Card.
Note If Memory Card backup is not required when the Memory Card is installed, dis-
able the option to transfer data from the Memory Card.
Section 4-9
Transfer
data to Memory