Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manual page 144

Creating Function Block
Other Editing Functions
Selecting Lines
Deleting Lines
Copying Block Diagrams
118
For example, for the Basic PID Block, the PV destination block address and
ITEM will be stored.
• Selecting One Line
The line will be highlighted in red when it is right-clicked. Use this procedure
mainly for deleting lines.
• Selecting All Lines Connected to an Item
All information can be displayed for lines connected to ITEMs in block dia-
grams. If an ITEM is left-clicked, all lines connected to the ITEM will be high-
lighted in pink. Right-click and select Release Selection from the pop-up
menu to unselect lines.
• Selecting All Lines Connected to a Function Block
All information can be displayed for lines connected to function blocks in block
diagrams. If a function block is left-clicked, all lines connected to the function
block will be highlighted in pink. Right-click and select Release Selection from
the pop-up menu to unselect lines.
Select a line and select Delete Line or Delete Selected Lines.
• Selecting One Line
Right-click and select Delete Line from the pop-up menu.
• Selecting Multiple Lines
Right-click and select Delete Selected Lines from the pop-up menu.
Block diagrams can be copied to register new block diagrams. Using this func-
tion, each function block registered in the block diagram is copied to a new func-
tion block group. Use the following procedure.
1) Right-click the function block group (i.e., copy source block diagram) in
the Workspace and select FBD – Copy from the pop-up menu.
2) Select the LCB/LCU element (i.e., LCU or LCB) and then select FBD –
Paste from the Settings Menu, or right-click and select FBD – Paste
from the pop-up menu.
3) The Insert Function Block for Diagram Dialog Box will be displayed. Se-
lect the number and name for the function block group.
4) A dialog box for automatically setting CSV tags will be displayed. Select
Yes to automatically perform settings for function blocks created by cop-
ing a block diagram.
The following restrictions apply when copying block diagrams.
• Parameters will also be copied.
• Only the blocks that are pasted to the block diagram will be copied. Function
blocks that are registered to function block group trees and not pasted to block
diagrams will not be copied.
• Block diagrams cannot be pasted to other nodes. The copy buffer will be
cleared if the active node is switched.
• Block diagrams cannot be pasted to other LCU/LCB elements (e.g., pasting an
LCB block diagram to an LCU block diagram).
Section 3-1