Wireless Debugging (Lcbjj Ver. 3.0 Or Later Only) - Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manual

Operation Check

4-6-4 Wireless Debugging (LCBjj Ver. 3.0 or Later Only)

1, 2, 3...
2. Click the Stop Block Operation Button. The operation of the function block
will stop and "Stopped" will appear at the top of the function block.
The function for online debugging of created function blocks is referred to as the
wireless debugging.
Calibration Mode
The present values for the control block can be force-set as pseudo-input values
from the Monitor Run Status Window. The mode that performs pseudo-input us-
ing the wireless debugging function is called the Calibration Mode.
Starting Calibration Mode
Use the following procedure to set pseudo-values.
1. Confirm the operation of block diagrams.
2. Right-click a function block for which the present values are to be changed
and select Wireless Debug from the pop-up window.
3. The following dialog box will be displayed.
4. Select the Calibration Option for debugging settings in the dialog box.
5. The ITEMs that can be input and the values are determined by each function
block. Input the values according to the following table.
Section 4-6
275