Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manual page 64

Basic Operating Procedures
1, 2, 3...
Example: Right-click on the Loop Control Board (e.g., CS1W-LCB05).
(2) For details on starting the CX-Process Tool, refer to 2-1-9 Starting the CX-
Process Tool.
2. Create a new project in the Project Workspace.
3. Go to step 3, below, and set the System common block.
Starting by Selecting Start with Settings Inherited from the I/O Tables
1. Right-click the Loop Control Board or Unit in the I/O Table Window, and se-
lect Start Special Application - Start with Settings Inherited.
Select Start Special Application .
Start with Settings Inherited.
Select
Section 1-7
37