Connection Map Tab Page - Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manual

Setting Options Section 3-12

3-12-9 Connection Map Tab Page

Note The connection map is displayed by selecting Connection Map from the
Execute Menu.
Scale
This option sets the zoom factor for the connection map. ( This option performs
the same function as the Change Scale command on the pop-up menu display
after right-clicking on the connection map.)
Always update the contents of connection map.
When this option is selected (the default), the connection map is continuously
refreshed.
When this option is not selected, the connection map is not continuously re-
freshed.
233