Compare - Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manual

Downloading, Uploading and Comparing Data

4-3-3 Compare

260
b) Select an LCU/LCB element from the File and Block to Compare field.
c) Set the level to initial setting data and operation data.
d) Click the Compare Button.
e) Check the comparison results and confirm that the file matches the data
in registered function block and block diagram information. If they match,
take step 3 below.
3. Select the LCU/LCB element (LCB01, LCB03, LCB05, LCB05D, LC001-1 to
LC001-3) or the function block to be refreshed and select Transfer from LC
– Previous from the Execute Menu. The following dialog box will appear.
4. Click the OK Button.
The following dialog box will appear.
5. Click the Start Button.
Note If the data of the existing file currently opened with the CX-Process Tool does not
match the function block data in the Loop Controller in the following item a) or b),
the data currently opened will be illegal.
a) Registered function block (block address vs. block model)
b) Block diagram information
If the file does not match the data in item c) below and ITEM200 (the Mnemonics
Flag) is set to 1, the mnemonics to be read will not match the ladder diagram.
c) Step ladder program in mnemonics
6. The uploading of the previous data will start. A dialog box will appear while
the data is uploaded.
7. The box will be closed automatically when processing is completed.
It is possible to compare the data in the currently active function block file and the
data in the Loop Controller connected online. The data can be in units of LCU/
LCB elements, sequence control folders in the function block group, or function
blocks.
It is also possible to compare the data in the currently active function block file
with the data in other files. The data can be compared in units of files, LCU/LCB
elements, sequence control folders in the function block group, or function
blocks.
Initial setting data or operation data or initial setting data and operation data can
be selected for comparison.
Section 4-3