Printing; Printable Data - Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manual

Printing

3-11 Printing

3-11-1 Printable Data

Data
Function blocks Block addresses, block models,
block names, and all ITEM settings.
Select the desired LCU/LCB
element, function block group, or
function block.
Block diagrams Block diagram
Note Annotations (comments) can
Ladder diagrams Ladder symbols and operands
(address)
Note Annotations (comments) can
Cross-references Cross-references (i.e., contact
of Step Ladder addresses, block addresses,
Programs mnemonic row numbers,
instructions, and output comments)
Monitor tag list Monitor tag list (i.e., open monitor
(Loop Control tag lists, LCB elements, nodes,
Units only) etc.)
CSV Tag List CSV tag list (i.e., open CSV tag
lists, LCU/LCB elements, or nodes).
All All of the above data by LCU/LCB
element or node (i.e., function
blocks, block diagrams, ladder
diagrams, cross-references, and
monitor tag lists)
ITEM list Open ITEM lists
Sequence Table Sequence table
The entire table will be printed if
General is selected. If Separated is
selected, expanded portions will be
printed on separate pages.
User Link Table ---
Connection Map ---
216
Function blocks, block diagrams, ladder diagrams, the cross-references of step
ladder programs, or monitor tag lists can be printed.
Select the ITEM to be printed using the Project Workspace and then select Print
and the type of data to be printed from the File Menu, or right-click the data that is
currently open and select Print ff from the pop-up menu.
Note Data can be printed vertically (portrait) on A4 only. Do not use any other paper
size. Block diagrams, however, can be printed horizontally (landscape) on A4.
Printable item
be inserted.
be inserted.
Condition for File menu
selection
--- Print/Function
Block
Edit Block Print/Block
Diagram Mode Diagram
Edit Step Ladder Print/Ladder
Program Mode Diagram
When Print/
cross-references Cross-References
are displayed
When monitor tag Print/Monitor Tag
lists are displayed List
When LCU/LCB Print/CSV Tag List
element or node
function block file
is selected
--- Print/All
When ITEM lists Print/ITEM List
are displayed
When LCU/LCB Print/Sequence
element is Table
selected
When LCU/LCB Print/User Link
element is Table
selected
When LCU/LCB Print/Connection
element or block is Map
selected
Section 3-11
Pop-up menu
None
Print Block
Diagram in Block
Diagram Edit
Mode
Print Ladder
Diagram in Ladder
Diagram Edit
Mode
Print
Cross-Reference
when cross
references are
displayed
Print when the
monitor tag list is
displayed
Print when the
CSV tag list is
displayed
None
Print when the
ITEM list is
displayed
Print/Sequence
Table
Print/User Link
Table
Print/Connection
Map