Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Manual page 41

CX-Process Tool Specifications
Item
Files that are created
Offline operation functions
Online operation functions
14
The following files are created in the project folder.
• Multi-node files (.mul) for Project Workspace: Created by user.
• Function block files (.ist) consisting of initial set data and operation data: Created by
the system.
• Block diagram information files (.mtbd): Created by the system.
• Mnemonics/ladder diagram information files (.mtld): Created by the system.
• Monitor tag files (with fixed file name without extension): Created by user.
• Job information files (.sjb): Created by the system.
• Comment files (.cmt): Created by the system.
• CX-Server Settings file (.cdm): Created by the system.
• CSV tag settings file (project_name.csv): Created by system; can be edited by user.
• CSV tag files (.csv) for SCADA software: Created by user.
• Files for Loop Controllers (.lcb): Created by the system.
• User link table files in CSV format (LinkTable.csv): Created by the user.
• Sequence table files (.sbl): Created by the system.
• User-defined block files (User-defined_block_name.ucb): Created by the user.
• Sequence table operation validation and online editing/elements (timers and count-
ers) set value change and present value display files
• Setting of function block ITEM data (including System Common block settings)
• Software wiring of analog signals
• Displaying or printing the arbitrary text (tags) attached to block connection diagrams
and ladder diagrams
• Displaying connection maps (showing the I/O relationships of a function block)
• Editing user link tables
• Creating sequence tables
• Description of Step Ladder Program block commands
• Setting of tags for CX-Process Monitor (on block designated as the source in the Send
to Computer block, contacts and analog signals)
• Backing up function block data from RAM to flash memory or restoring function block
data from flash memory to RAM.
• Converting LCU/LCB element data between different models of Loop Controller.
Downloading of function block data (download/upload to and from Loop Controllers)
Comparing between node function block files (including mnemonics) and Loop
Controllers
Run/stop command for Loop Controllers (all function blocks)
System monitor run status: Monitoring/manipulation of System Common block (Block
Model 000) (including monitoring of load rate of function blocks in each operation
cycle group)
• Loop Controller monitor run status: Confirmation of function block wiring operation (in-
cluding operation stop/stop cancel on each function block), confirmation of Step Lad-
der Program operation
Changing SPs and tuning parameters such as PID constants in function blocks
(Control Blocks)
• Initializing RAM in the Loop Controller.
• Backing up function block data from RAM to flash memory in the Loop Controller block
and restoring the data to RAM.
• Creating I/O tables (online only)
• Setting the PLC Setup
• Changing the CPU Unit's operating mode
Note 1. The Windows Vista 64-bit version and Windows XP x64 Edition are not sup-
ported.
Specification
Section 1-3