Syswin Data Trace And Time Chart Monitor Files - Omron CX-PROGRAMMER V9 Operation Manual

PART 2: CX-Server PLC Tools
CHAPTER 5 – Data Trace/Time Chart Monitor Component
The display of the Data Trace or Time Chart Monitor can be further refined by displaying a grid over the window.
Select Grid from the Options menu to control the display of the grid.
Any symbol names inherited from the invoking application can be displayed on Data Trace or Time Chart Monitor
by selecting Show Symbol Names from the Options menu.

SYSWIN Data Trace and Time Chart Monitor Files

SYSWIN 3.x Data Trace Files (*.SDT) and Time Chart monitoring files (*.STC) can be opened directly into
CX-Server. Use the following procedure to import these files:
1, 2, 3...
CX-Server PLC Tools_Page 70
5. Select the Apply pushbutton from the Trace Colour Selection dialog to apply the change
colour settings. Select the OK pushbutton to apply the change colour settings and close the
dialog. Select the Cancel pushbutton to abort the operation.
1. Select the Open button from the toolbar. The Open dialog is displayed.
2. Select an alternative file type from the Files of Type field, either SYSWIN version 3 Data
Trace Files (.SDT) or SYSWIN version 3 Time Chart Monitor Files (.SDC).
3. Select a file to open.
4. Select the Open pushbutton to import the file. Select the Cancel pushbutton to abort the
operation.
OMRON