Distinguishing Between The Cs/Cj/Cp And C/Cv I/O Table Windows; I/O Table Window Functions - Omron CX-PROGRAMMER V9 Operation Manual

PART 2: CX-Server PLC Tools
CHAPTER 3 – IO Table Component
PLC Series PLC model
CS/CJ/CP Series CS1G/CJ1G, CS1H, CS1G-H, CS1H-H,
CS1D-H, CS1D-S, CJ1G-H, CJ1H-H,
CJ1M, or CP1H
Series other than C Series:
CS/CJ/CP C200H, C200HS, C200HX/HG/HE,
C200HX-Z/HG-Z/HE-Z, C500,
C1000H, or C2000H
CVM1/CV Series:
CVM1, CVM1-V2, CV1000, CV2000,
or CV500 C2000H

Distinguishing between the CS/CJ/CP and C/CV I/O Table Windows

The I/O Table Windows can be identified by the names in the project directory tree and the colors of icons, as
shown in the following table.
I/O Table Window variation
1) CS/CJ/CP I/O Table Window
2) C/CV I/O Table Window

I/O Table Window Functions

The following table describes the functions of the two I/O Table Windows.
I/O Table Window variation
1) CS/CJ/CP I/O Table
Window
2) C/CV I/O Table Window
CX-Server PLC Tools_Page 20
Note: With version 5.0 and earlier versions of the CX-Programmer, the C/CV I/O Table
Window is always selected, regardless of the PLC model and operating system.
Names in project directory tree
I/O Table and Unit Setup
I/O Table
Existing functions
Creating a registered I/O table
(Displays Unit type, number of Units occupied, and
number of I/O words occupied.)
•
Software switch settings (See note 1.)
•
Unit settings (See note 1.)
•
Replace Unit online.
• Display Unit production information.
• Register/display Unit comment.
• Register/display Unit profile.
• Monitor Unit error log.
Note 1.
The software switch settings and Unit settings are
included in the Special I/O Unit and CPU Bus Unit
parameter settings.
Creating a registered I/O table
(Displays Unit type, number of Units occupied, and
number of I/O words occupied.)
• Software switch settings
• CPU Bus Unit settings
• Replace Unit online.
• Display Unit production information.
• Monitor Unit error log.
• When editing the I/O table offline, words can be
reserved by installing Dummy Units.
Selected I/O Table Window
1) CS/CJ/CP I/O Table
Window
2) C/CV I/O Table Window
(See note.)
Colors of icons in project directory tree
: Grey and yellow
: Sky blue
New functions
•
•
•
•
Note 2.
When the CX-Programmer is installed from
the CX-One.
None
Special I/O Unit and CPU Bus Unit
parameter settings
Specialized Support Tool startup function
(See note 2.)
Display a Rack's current consumption
(CS/CJ Series only) and Rack width (CJ
Series only)
Monitor CPU DIP Switch settings online.
OMRON