Omron CX-PROGRAMMER V9 Operation Manual page 352

OMRON
Reference: Size modifications and offsets can be set in the Area Specify dialog box that is
• Send Area
displayed by double-clicking on the data link configuration icon (oval for send area
or rectangular for receive area
Area Specify Dialog Box (Send Area)
Area Specify Dialog Box (Receive Area)
Note: With SYSMAC LINK, the send size can be set, but the receive size and the reception
offset cannot. Therefore, the Area Specify dialog boxes are as shown in the following
example diagrams.
Can be set.
).
Specify send size.
Offset cannot be changed.
Specify send size.
Offset cannot be changed.
• Receive Area
Cannot be set.
PART 2: CX-Server PLC Tools
CHAPTER 10 – Data Links
CX-Server PLC Tools_ Page 109