Omron CX-PROGRAMMER V9 Operation Manual page 43

OMRON
Version 8.0 Upgrade Information
Functionality Improved from Version 7.2 to 8.0
Support has been added for the following PLC models as part of the version 7.2 to version 7.3
upgrade.
Compatible PLC Models
New CP-series CP1L CPU Units
The CP-series CP1L CPU Units (CP1L-L10D@-@ and CP1L-M60D@-@) are
supported.
The following functions have been added or improved as part of the upgrade from version 7.3 to
8.0.
Compatible PLC Models
CJ-series CJ2 CPU Units
The CJ-series CJ2 CPU Units (CJ2H-CPU6@-EIP) are supported.
• EtherNet/IP
Connection is possible to the CJ2H-CPU6@-EIP and EtherNet/IP Units.
• New Ladder Programming Instructions
The new instructions for the CJ2 CPU Units can be used, including the Tracking
Instructions and Data Search/Sort Instructions.
Improved Data Trace Function
Overhaul of Data Tracing Function for CS/CJ-series PLCs
If a CJ2 CPU Unit is used, long-term continuous data tracing is possible.
Operations have been improved, including zooming in and out of trace results
graphs and adjusting offsets. Trace results can also be printed or saved as bit
maps.
PLC Backups
Data from the CPU Unit, Special I/O Units, and CPU Bus Units can be backed up
as a batch from a personal computer. The backup data can be compared or
restored as a batch, or the data for only selected Units can be restored.
PART 1: CX-Programmer
CX-Programmer_Page (ix)