Omron CX-PROGRAMMER V9 Operation Manual page 45

OMRON
Version 7.2 Upgrade Information
Functionality Improved from Version 7.0 to Version 7.2
Support has been added for the following PLC models as part of the version 7.0 to version 7.10
upgrade.
Compatible PLC Models
The high-speed CJ1-H-R CPU Units (CJ1-CPU@@H-R) are supported.
Support has been added for the following PLC models as part of the upgrade from version 7.10 to
7.11.
Compatible PLC Models
The CP-series CP1L CPU Units (CP1L-M and CP1L-L) are supported.
The following functions have been added or improved as part of the upgrade from version 7.11 to
7.2.
Improved IEC 61131-3 Language Support
Support has been strengthened for the ST and SFC languages, which are IEC
61131-3 languages.
Ladder, ST, and SFC programs can be combined freely, so the user program can
be written in the language most appropriate for the required processing. Using the
most appropriate language can reduce program development time and simplify
programming.
• Support for ST Language Programming in Tasks
Previous version (version 7.0)
The ST language could be used only in function
blocks.
• Support for SFC Language Programming in Tasks
Previous version (version 7.0)
The SFC language could not be used.
New version (version 7.2)
The ST language can be used in programs other than function
blocks. (ST programs can be allocated to tasks.)
Different languages can be used in a single user program, which
allows numerical processing and string processing to be written in
ST programs, while other processing is written in ladder or SFC
programs.
Note: The ST language is supported only in CS/CJ-series CPU
Units with unit version 4.0 or later. It is not supported in CP-
series CPU Units.
New version (version 7.2)
The SFC language can be used in programs. (SFC programs can
be allocated to tasks.)
Different languages can be used in a single user program, which
allows the overall system processing to be written in SFC programs,
while other processing is written in ladder or ST programs.
Note: The SFC language is supported only in CS/CJ-series CPU
Units with unit version 4.0 or later. It is not supported in CP-
series CPU Units.
PART 1: CX-Programmer
CX-Programmer_Page (xi)