Omron CX-PROGRAMMER V9 Operation Manual page 55

OMRON
Version 5.0 Upgrade Information
The following tables outline the changes that have been made from version 4.0 to version 5.0 of the CX-
Programmer.
Functionality Improved from Version 4.0 to Version 5.0
Compatible PLCs
CX-Programmer version 5.0 supports the following PLCs:
CS/CJ-series CPU Unit Ver. 3.0
CJ-series CJ1H-CPU67H CPU Unit
(Program capacity: 250K steps, I/O points: 2,560 points)
Improvements to Functionality
Function Block (FB) Support (CS/CJ-series CPU Unit Ver. 3.0 or later)
Previous version (Ver. 4.0)
Function blocks (FB) were
not supported.
Symbol Filtering Using Symbol Names and I/O Comments When Inputting Contacts,
Coils, and Special Instruction Operands
Previous version (Ver. 4.0)
Searches were possible only
for symbol names of
contacts and coils, and
mnemonics of special
instructions when inputting
contacts, coils, or special
instruction operands.
Function blocks are supported for CS/CJ-series CPU Units Unit Ver. 3.0 or later.
Ladder programming or structured text (ST language) can be used for algorithms.
Function block data can be downloaded from or uploaded to CS/CJ-series CPU Units
Unit Ver. 3.0 or later and saved in standard project files (.cxp) and standard file
memory .obj files. OMRON's Function Block Library can also be used.
Searches and list displays are possible for text strings that are part of symbol names or
I/O comments when inputting contacts, coils, or special instruction operands.
a) By entering a specific text string when inputting I/O contacts or operands, a list of
address_comment or name_address_comment combinations that contain the
specified text string in the symbol name or I/O comment is displayed in a drop-
down list. The desired symbol can then be input by selecting it from the list.
b) In the same way, when inputting operands for special instructions, the Filter
Symbol Button can be clicked to input a text string in the Filter Symbol Dialog Box
to display a list of address_comment or name_address_comment combinations
that contain the specified string in the symbol name or I/O comment in a drop-down
list. The desired symbol can then be input by selecting it from the list.
New version (Ver. 5.0)
New version (Ver. 5.0)
PART 1: CX-Programmer
CX-Programmer_Page (xxi)