5-2 Adjusting/Debugging Online
This section explains functions used for debugging and for adjustments during test runs.
5-2-1 Monitoring
Displaying Conduction Status
The conduction status of the program rungs will be displayed. This will allow you to
confirm program execution.
Change CP1L to the MONITOR operating mode to display the conduction
status.
The conduction status is displayed on the program.
Displaying Conduction Status at Multiple Sections
The diagram workspace can be split. Multiple sections of the program can be
viewed simultaneously.
1
5-2 Adjusting/Debugging Online
1
SYSMAC CP1L/CP1E Introduction Manual
5
5
5
91