Omron CP1E - INTRODUCTION Introduction Manual page 10

Disclaimers
CHANGE IN SPECIFICATIONS
DIMENSIONS AND WEIGHTS
PERFORMANCE DATA
ERRORS AND OMISSIONS
8
Product specifications and accessories may be changed at any time based on
improvements and other reasons.
It is our practice to change model numbers when published ratings or features
are changed, or when significant construction changes are made. However,
some specifications of the products may be changed without any notice. When
in doubt, special model numbers may be assigned to fix or establish key
specifications for your application on your request. Please consult with your
OMRON representative at any time to confirm actual specifications of
purchased products.
Dimensions and weights are nominal and are not to be used for manufacturing
purposes, even when tolerances are shown.
Performance data given in this manual is provided as a guide for the user in
determining suitability and does not constitute a warranty. It may represent the
result of OMRON's test conditions, and the users must correlate it to actual
application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
The information in this manual has been carefully checked and is believed to be
accurate; however, no responsibility is assumed for clerical, typographical, or
proofreading errors, or omissions.