Inputting Differentiated Up Contacts - Omron CP1E - INTRODUCTION Introduction Manual

A first cycle flag will be displayed on the ladder program.

4-5-7 Inputting Differentiated Up Contacts

1.
While referring to 4-2-2 Ladder Programs, enter a ladder program,
extending to de-escalation motor contact, " 10001 " .
2.
Press the [Enter] key.
A space for inserting an OR circuit will be created.
3.
Press the [W] key.
"OR 100.01" will be displayed.
4.
Input address " 3 " . Press the [Enter] key.
The Comment dialog box will be displayed.
4-5 Inputting Programs
SYSMAC CP1L/CP1E Introduction Manual
4
4
71