Omron CP1E - INTRODUCTION Introduction Manual page 59

Inputting OR Circuits
1.
Place the cursor on the program. Press the [Enter] key.
A space for inserting an OR circuit will be created.
2.
Press the [W] key.
"OR 0.05" will be displayed.
3.
Press the [Enter] key.
"Bit (1/1)" will be displayed and "0.05" will be displayed in reverse video.
4.
Input address " W0 " . Press the [Enter] key.
"W0" is entered. The Comment dialog box will be displayed.
4-5 Inputting Programs
SYSMAC CP1L/CP1E Introduction Manual
4
4
57