Confirming Cycle Time - Omron CP1E - INTRODUCTION Introduction Manual

5.
Select [PLC] - [Online Edit] - [Send Changes] from the main menu.
The edited rungs will be transferred to CP1L.

5-2-6 Confirming Cycle Time

1.
Change CP1L to the MONITOR or RUN operating mode.
2.
Click the diagram workspace.
Cycle time will be displayed on the status bar.
Note For details on cycle time, refer to A-3-2 CPU Unit Behavior.
5-2 Adjusting/Debugging Online
SYSMAC CP1L/CP1E Introduction Manual
5
5 5
99