Ladder Program - Omron CP1E - INTRODUCTION Introduction Manual

4-2-2 Ladder Program

The ladder program for the example application is shown below.
Work area * 2
CLOSE button
Car detection sensor * 8
Creating the program in CX-Programmer will be explained in the next section.
0.04 T0000
Light detection Timer * 3
sensor * 1
W0.00
W0.00
Work area
0.04
Light detection sensor
T0000
Timer
C0000
Counter
A200.11
P_First_Cycle First cycle flag * 7
C0000 0.01
Counter STOP button
0.00
OPEN button
100.00
Escalation
motor
0.01
0.02
CLOSE button
100.01
De-escalation
motor
0.03
4-2 Creating Ladder Programs
W0.00
Work area * 4
* 1 Refer to Inputting Contacts of 4-5-2 Inputting Contacts.
* 2 Refer to Inputting OR Circuits of 4-5-2 Inputting Contacts.
* 3 Refer to Inputting Closed Contacts of 4-5-2 Inputting Contacts.
* 4 Refer to 4-5-3 Inputting Output Coils.
TIM
0000
#50
CNT
0000
* 5 Refer to 4-5-4 Inputting Timers.
* 6 Refer to 4-5-5 Inputting Counters.
* 7 Refer to 4-5-6 Inputting Auxiliary Areas.
0.05 100.01 100.00
Upper De-escalation Escalation
motor
limit LS motor
0.06
100.00
100.01
Lower Escalation De-escalation
limit LS
motor motor
* 8 Refer to 4-5-7 Inputting Differentiated Up Contacts.
SYSMAC CP1L/CP1E Introduction Manual
Timer * 5
Counter * 6
#3
4
4
47