Omron CP1E - INTRODUCTION Introduction Manual page 60

4
4-5 Inputting Programs
4
Inputting Closed Contacts
58
SYSMAC CP1L/CP1E Introduction Manual
5.
Input " Work Area " as the I/O comment. Press the [Enter] key.
An OR circuit representing the work area contact will be displayed.
Next, input a closed contact.
1.
Press the up arrow key.
The cursor is moved upward.
2.
With the cursor in the up position, press the [/] key.
"LDNOT W0.01" will be displayed.
3.
Press the [Enter] key.
"Bit (1/1)" will be displayed and "W0.01" will be displayed in reverse video.
4.
Input address " T0 " . Press the [Enter] key.