Deleting A Client; Setting Up E-Mail Alerts - Intel D39172-003 User Manual

Deleting a Client

Setting Up e-mail Alerts

www.DataSheet4U.com
Intel® Entry Storage System SS4000-E User Guide
the disk again. For more information, refer to
page 126 and
If you remove the Intel® Client Backup and Recovery software from a particular
computer, or if you change the computer name, the original computer name remains on
the storage system and counts toward the total number of computers that are allowed to
back up to the storage system. To both delete all backups of all disks for a particular
computer and the computer name, you must delete the client.
To delete a client:
1. In the navigation bar, click Backups.
2. Select the radio button to the left of the computer whose backups and computer name
you want to delete from the storage system (in the first Select column).
3. Click Delete Client.
4. When prompted to confirm the deletion, click OK.
All backups of all disks associated with this computer are deleted, and the computer
name is also deleted from the storage system.
Note: If you delete a client and the user did not previously remove protection for
that disk, when the user subsequently accesses the Intel® Client Backup and
Recovery software, the Status page will indicate that the backup of the
protected disk is offline. To back up the disk once again, the user must remove
protection and then protect the disk again. For more information, refer to
"Removing Protection" on page 126
page 97.
The Alerts page allows you to set up the storage system to notify up to three people via e-
mail if a problem occurs—for example, if one of the disks fails, or if insufficient space is
available for creating new files or performing a backup.
"Protecting Your Disks" on page
and
Managing Your Storage System
"Removing Protection" on
97.
"Protecting Your Disks" on
57