Recovering Files Or Folders - Intel D39172-003 User Manual

Protecting Local Disks

Recovering Files or Folders

www.DataSheet4U.com
114
before a system failure occurs. Once your system has failed, you cannot
enable remote boot.
If your computer does not support either the recovery CD or the PXE
protocol, gather your hardware information (as described in step 2 in
"Recovering a System Disk Using the Recovery CD" on page
send it to your vendor. You might be able to obtain an updated recovery
CD or a new driver that will make your computer compatible with your
existing recovery CD.
To recover selected folders, files, or sections of files from a backup:
1. Click Restore.
2. In the Protected disk list, select the disk that contains the folders or files that you
want to recover.
3. In the Backups list, select the backup from the desired date and time.
You can select only a backup for which No appears in the Backup View Open
column.
4. Click View Backup.
5. When the confirmation message appears, click OK.
After a few moments, a window opens automatically, displaying all the data
associated with the selected backup. You can now open the folders and files in the
backup view to make sure they contain the information you want, and copy any of the
data to your local disk.
Caution: You can open and change the files in the backup view, and even create
new folders or files there. However, as soon as you close the view (as
Intel® Entry Storage System SS4000-E User Guide
117) and