Table of Contents

Advertisement

Other Hazards

Battery Replacement
Caution: There is the danger of explosion if the battery is incorrectly replaced. When replacing the
Cooling and Airflow
Caution: Carefully route cables as directed to minimize airflow blockage and cooling problems.
Laser Peripherals or Devices
Caution: To avoid risk of radiation exposure and/or personal injury:
www.DataSheet4U.com
Intel® Entry Storage System SS4000-E User Guide
conductive foam pad if available but not the board wrapper. Do not slide board over any
surface.
battery, use only the battery recommended by the equipment manufacturer.
Dispose of batteries according to local ordinances and regulations.
Do not attempt to recharge a battery.
Do not attempt to disassemble, puncture, or otherwise damage a battery.
For proper cooling and airflow, operate the system only with the chassis covers installed.
Operating the system without the covers in place can damage system parts. To install the
covers:
Check first to make sure you have not left loose tools or parts inside the system.
Check that cables, add-in boards, and other components are properly installed.
Attach the covers to the chassis according to the product instructions.
Do not open the enclosure of any laser peripheral or device
Laser peripherals or devices have are not user serviceable
Return to manufacturer for servicing
Safety Information
205

Advertisement

Table of Contents
loading

This manual is also suitable for:

Entry storage system ss4000-e

Table of Contents