Receiving Event Notifications; Changing The Recovery Password - Intel D39172-003 User Manual

Protecting Local Disks

Receiving Event Notifications

Changing the Recovery Password

Note: The same password is used for all disks backed up to the same storage system. If you
www.DataSheet4U.com
108
When you install Intel® Client Backup and Recovery, the Client Backup and Recovery
Event Viewer is also installed. This program starts automatically whenever you start your
computer, and the Agent icon appears in your system tray.
When the Agent is running, a pop-up message appears whenever a backup-related
problem occurs (for example, if a scheduled backup did not occur because the storage
system was not running).
You can close the Agent at any time. However, if you do this, notifications will no longer
appear automatically. If you subsequently want to start the Agent again, you can do so
using Intel® Client Backup and Recovery.
To close the Agent:
•
In the system tray, right-click the Agent icon (
Recovery Agent.
To restart the Agent after you have closed it:
•
From the View menu, click Agent.
The Agent icon reappears in the system tray.
When you protect a disk, you specify what password to use for recovering the disk using
the recovery CD or when you remotely boot from a backup on the storage system. You
can change this password at any time as long as the Status of the backup is Normal. (This
ensures that the change is also made on the storage system.)
backed up multiple disks to the same location and change the password for one, the
password is changed for all of them. However, if you backed up one disk to one storage
system and a different disk to a different storage system, each disk can have a different
recovery password..
) and click Exit Client Backup and
Intel® Entry Storage System SS4000-E User Guide