Figure 4. Removing Drive Carrier From Storage System; Figure 5. Removing Baffle From Drive Carrier - Intel D39172-003 User Manual

www.DataSheet4U.com
Intel® Entry Storage System SS4000-E User Guide
2. Disconnect the storage system from its power source.
3. Press in the green latch at the end of the drive carrier to disengage the drive carrier
from the storage system. Pull out on the black lever to pull the drive carrier partially
out of the storage system. Slide the drive carrier all the way out of the storage system.
1
2
3
4

Figure 4. Removing Drive Carrier from Storage System

4. Remove the four screws that attach the plastic baffle to the drive carrier. Two screws
are located on each side of the drive carrier.
Note: Store the plastic baffle for future use.

Figure 5. Removing Baffle from Drive Carrier

1
2
Getting Started
TP000230
TP00928
9