Adding Hard Disks To A Linear Or Normal Raid Configuration - Intel D39172-003 User Manual

Adding or Replacing Hard Disks

Adding Hard Disks to a Linear or Normal RAID Configuration

www.DataSheet4U.com
128
To add a hard disk to a linear or normal RAID configuration:
1. Insert the hard disk into the storage system. The drive LED will turn green once the
hard disk is recognized.
You can do this whether the storage system is powered on or off.
2. Access the Manager or refresh the browser window.
The Disk Change Notification page appears:
3. To add the disk to the storage system, click Add New Disk.
If the information on this page is not correct, click Scan to scan the storage system
again and update the page.
You can also click Shut Down to shut down the storage system, but you will be
presented with this page again the next time you access the Manager.
When you click Add New Disk, the following page appears:
Intel® Entry Storage System SS4000-E User Guide