Accessing The Manager - Intel D39172-003 User Manual

Getting Started

Accessing the Manager

www.DataSheet4U.com
26
9. On the confirmation message, click OK.
The Configuration page appears and the system is configured according to the
settings you specified. Once the configuration is complete, the system restarts.
10. After the storage system restarts, you can access the Manager, add users, and create
shared folders.
For more information, refer to
the Manager" on page
on page 35.
Once you have completed the initialized and configured your storage system (as described
in "Initializing your Storage System" on page 14
on page 21), you can access the Manager to add users, create shared folders, and perform
other tasks related to managing your storage system.
There are two ways to access the Manager:
•
Using the Console
•
Using a Web browser (Microsoft* Internet Explorer 6.0 or Firefox* 1.06 or newer)
Using the Console, you can access the Manager only from a computer in the same subnet
as the storage system, but you do not have to know the name or IP address of the storage
system or otherwise modify the network settings.
Using a Web browser, you can access the Manager from any computer in your network,
but you must know the name or IP address of the storage system. In addition, if you
configured the storage system to use a specific IP address, you might need to specify the
IP address of the gateway in your network before you can successfully access the
Manager using a Web browser. First access the Manager using the Console and then
specify the gateway address (as described in
page 64) and try to access it using a Web browser.
"Accessing the Manager" on page
27, "Adding Users" on page
and
"Changing the Network Settings" on
Intel® Entry Storage System SS4000-E User Guide
26, "Logging in to
32, and "Creating Shared Folders"
"Configuring Your Storage System"