Additional Requirements; Installing The Microsoft Iscsi Initiator - Intel D39172-003 User Manual

Additional Requirements

Installing the Microsoft iSCSI Initiator*

www.DataSheet4U.com
Intel® Entry Storage System SS4000-E User Guide
IMA requires an additional 5 MB of free hard disk space (for both the
application and associated log file data).
The Microsoft .NET* Framework 1.1 is also required and installed
automatically if it is not already installed. The .NET Framework requires
approximately 40 MB of additional free hard disk space.
In addition to the system requirements, the following criteria must be met:
•
You must be logged on as an administrator to install Intel® Client Backup and
Recovery and run it for the first time. However, after you have run the application
once as an administrator, you can subsequently run it when logged on as a user.
•
If your computer name includes any characters other than letters (A-Z or a-z),
numbers (0-9), hyphens (-), colons (:), or periods (.), you must change the computer
name before you use Intel® Client Backup and Recovery to protect a disk.
Note: Previous releases allowed the use of underscores (_) in the computer name. If
your computer name included this character and you protected a disk, you
must remove protection from all disks (as described in
Protection" on page
described in
described in
protect your disks again, you must remove the storage system from the list of
backup locations and add it again (as described in step 4 in
Disks" on page
•
If you're using a firewall on the computer that you plan to protect, open TCP port
11762 on the firewall. This ensures that Intel® Client Backup and Recovery can
communicate with the storage system. In additon, make sure that your firewall does
not block incoming network communication to the Microsoft iSCSI Initiator*.
Before you can install Intel® Client Backup and Recovery, you must download and install
the Microsoft iSCSI Initiator* 2.x.
To download and install this initiator:
1. Open a Web browser, enter the following in the address bar, and press Enter:
http://www.microsoft.com/downloads/details.aspx?
FamilyID=12cb3c1a-15d6-4585-b385-befd1319f825&DisplayLang=en
2. Scroll down to the Files in This Download section and download the item that ends
in x86fre.exe.
3. Select the option to run the file (Run, Open, or Run this program from its current
location).
4. If a security warning appears, click Run.
The installation wizard starts.
126), delete the client from the storage system (as
"Deleting a Client" on page
"Protecting Your Disks" on page
97.)
Protecting Local Disks
"Removing
57), and protect the disks again (as
97). In addition, when you
"Protecting Your
89