Note: Store the plastic baffle for future use.
www.DataSheet4U.com
Intel® Entry Storage System SS4000-E User Guide
4. Press in the green latch at the end of the drive carrier to disengage the drive carrier
from the storage system. Pull out on the black lever (see letter "B") to pull the drive
carrier partially out of the storage system. Slide the drive carrier all the way out of the
storage system.
1
2
3
4
Figure 16. Removing Drive Carrier from Storage System
5. Remove the four screws that attach the plastic baffle or defective hard disk to the
drive carrier. Two screws are located on each side of the drive carrier.
Figure 17. Removing Baffle from Drive Carrier
1
2
Hardware Installations and Upgrades
TP000230
TP00928
141