Removing Protection - Intel D39172-003 User Manual

Protecting Local Disks

Removing Protection

Note: If you plan to delete a protected partition, be sure to remove protection before you delete
www.DataSheet4U.com
126
If you no longer want to back up a particular disk or partition, you can remove protection
as long as a recovery is not currently in progress for that disk or partition. (If a recovery is
in progress, you must cancel it or wait until it completes before you can remove
protection.)
that partition. Otherwise, you might not be able to protect other partitions on that disk.
When you remove protection for a disk for which remote boot is enabled, remote boot will
be disabled and your computer will restart.
When you remove protection, you will no longer be able to back up the selected disk or
partition either automatically or manually, and you cannot recover data using Client
Backup and Recovery (as described in
"Recovering a Data Disk" on page
storage system are retained, and you can recover them using the recovery CD (as
described in "Recovering a System Disk Using the Recovery CD" on page
If you subsequently want to protect the same disk or partition again, you can re-use the
existing backups. You can also delete the existing backups on the storage system to free
up space for backups of other disks or partitions, either for this computer or other
computers. For more information, refer to
documentation for your storage system.
To remove protection:
1. In the Protected disk list on any page, select the disk for which you want to remove
protection.
2. From the Action menu, click Remove Protection.
3. When the confirmation message appears, click Yes.
The disk disappears from the Protected disk list. If another disk is protected, that disk
appears in the Protected disk list, and information about that disk now appears in the
application window. If no other disk is protected, click OK on the informational
message; the Protected disk list and application window are blank.
4. If remote boot was enabled, it is disabled. When prompted, click OK to restart your
computer.
"Recovering Files or Folders" on page 114
116). However, the backups that currently exist on the
"Deleting a Backup" on page 56
Intel® Entry Storage System SS4000-E User Guide
and
117).
the