Responding To Raid Failure - Intel D39172-003 User Manual

Responding to RAID Failure

www.DataSheet4U.com
Intel® Entry Storage System SS4000-E User Guide
When disk removal/failure causes the entire RAID to fail, the Disk Change Notification
page appears when you access the Manager or refresh the browser window:
Take the appropriate action:
To do this
Scan the storage system again and
update the information on the page
Re-install the same disk
Reconfigure the storage system using
the available disks
Adding or Replacing Hard Disks
Do this
Click Scan.
Click Shut Down.
After the storage system shuts down, re-install the same disk
and then restart the system.
NOTE: If you removed multiple disks, be sure to re-install
them in the opposite order than you removed them.
Click Reconfigure Disks and complete the system setup
pages (as described in "Configuring Your Storage System" on
page 21).
Caution: Reconfiguring the storage system deletes all user
information and all data on all the disks.
133