Recovering A System Disk Using The Recovery Cd - Intel D39172-003 User Manual

Recovering a System Disk Using the Recovery CD

Note: The recovery CD does not support USB keyboards or mouse devices.
www.DataSheet4U.com
Intel® Entry Storage System SS4000-E User Guide
2. In the Protected disk list, select the disk or partition that you want to recover.
3. In the Backups list, select the backup that you want to recover.
4. Click Restore Disk.
5. If you are restoring a partition, and at least one other partition on the same disk is also
protected, a message appears, advising you that protection will be stopped for that
partition during the recovery process. Click Yes to proceed.
6. When the recovery confirmation message appears, click Yes.
7. If any backup views are open (including backup views of disks other than the one you
are recovering), click Yes to close them.
The disk or partition is recovered to exactly its state at the date and time of the
selected backup.
To let you monitor the progress of this activity, the Status page appears automatically.
The Current activity area displays the percentage of the recovery that has completed,
and the speed at which the data is being sent over the network. The Progress bar
graphically indicates how much of the recovery is complete.
Note: You can cancel this operation at any time by clicking Stop Current Activity.
However, this will leave the local disk or partition in an incomplete state, and
you will have to recover it again before you can use it.
8. When you are prompted to restart the computer, click OK.
You do not have to restart your computer immediately, but you cannot access the
recovered disk or partition until you do.
As soon as you restart the computer, you must start Intel® Client Backup and
Recovery and back up the recovered disk or partition manually (as described in
"Manually Backing up Your Disk" on page
you recovered a partition and any other partitions on the same disk were protected,
you must manually back up those partitions as well.
When you use the recovery CD, you boot your computer from that CD rather than from
your local hard disk.
The recovery CD has a menu-style user interface. When responding to the prompts, use
the arrow keys to highlight the desired item, use the space bar to select or clear options (an
appears in the brackets when the option is selected), and press Enter to make your
X
selection. You can also tab between fields.
Although the recovery CD is used primarily for recovering a system disk or partition, you
can also use it to recover data disks or partitions.
Protecting Local Disks
105) to resume protection. In addition, if
117