3. Initial Startup and Configuration
Downloading Firmware
The Download Code screen allows you to download firmware from a TFTP server.
To access the Download Code screen, follow this menu selection sequence:
Procedure
To download firmware:
3-16
Main Menu
Control
main/control/download_code
Image File Name:
TFTP Server IP Address:
Destination:
Immediately Apply Download:
Start Transfer:
Packets Sent:
Packets Received:
Bytes Sent:
Bytes Received:
Transfer Status:
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
1. Position the cursor in the Image File Name field. Type the name of the file to
be downloaded.
The file name may be a regular path name expression of directory names
separated by a forward slash (/) ending with the file name. The total path
name length can be up to 128 characters.
2. Position the cursor in the TFTP Server IP Address field. Enter the TFTP server
IP address.
3. Position the cursor in the Destination field. Use the spacebar to select a
network destination for the TFTP server. Select DSL if the TFTP server
destination is the DSL link or COM if the TFTP destination is the COM port.
4. Position the cursor in the Immediately Apply Download field. If you would like
the download to be effective immediately, select Yes.
December 2001
Download Code
DOWNLOAD CODE
000.000.000.000
DSL
Yes
No
0000000
0000000
0000000
0000000
Transfer Pending
Model: 797x
Clear
Clear
MainMenu
Exit
7900-A2-GB21-20