Function Keys - Paradyne 7974 User Manual

Procedure
To make a menu or field selection:
The current setting or value appears to the right of the field name. You can enter
information into a selected field by:
T
T
If a field is blank and the Field Values screen area displays valid selections, press
the spacebar. The first valid value for the field will appear. Continue pressing the
spacebar to scroll through other valid values.

Function Keys

All function keys located below the dotted line operate the same way (upper- or
lowercase) throughout the screens.
7900-A2-GB21-20
1. Press the Tab key or the right arrow key to position the cursor on a menu or
field selection. Each selection is highlighted as you press the key to move the
cursor from position to position.
2. Press Enter.
The selected menu or screen appears.
3. Continue Steps 1 and 2 until you reach the screen you want.
Typing in the first letter(s) of a field value or command.
Switching from the screen area to the function key and message area below
the dotted line and selecting or entering the designated function key.
For the screen
function . . . Select . . . And press Enter to . . .
ClrFar F or f
ClrNear N or n
ClrStats S or s
Delete L or l
Exit E or e
MainMenu M or m
New N or n
PgDn D or d
PgUp U or u
ResetMon R or r
Save S or s
December 2001
2. Using the Asynchronous Terminal Interface
Clear far-end network statistics and refresh the screen.
Clear near-end network statistics and refresh the screen.
Clear DSX-1 statistics and refresh the screen.
Delete data.
Terminate the asynchronous terminal session.
Return to the Main Menu screen.
Enter new data.
Display the next page or group of entries.
Display the previous page or group of entries.
Reset an active Monitor 511 test counter to zero.
Save information.
2-7