Configuration Loader - Paradyne 7974 User Manual

Configuration Loader

The Configuration Loader screen allows you to upload configurations to and
download configurations from a TFTP server. To access the Configuration Loader
screen, follow this menu selection sequence:
Procedure
To upload or download a configuration:
7900-A2-GB21-20
Main Menu Configuration
main/configuration/config_loader
Configuration File Name:
TFTP Server IP Address:
TFTP Transfer Direction:
Destination:
Start Transfer:
Packets Sent:
Packets Received:
Bytes Sent:
Bytes Received:
Transfer Status:
Activate new configuration? No
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
1. Position the cursor in the Image File Name field. Type the name of the file to
be downloaded, or the name to be used for the file to be uploaded.
The filename may be a regular path name expression of directory names
separated by a forward slash (/ ) ending with the filename. The total path name
length can be up to 128 characters.
— DOS machine: If the TFTP server is hosted by a DOS machine, then
directory and filenames must consist of eight or less characters with an
optional suffix of up to three characters. The system will automatically
upload the configuration file and create directories and filenames, as
needed.
— UNIX machine: If your server is hosted by a UNIX machine, the
configuration file you name must already exist. It will not be created on the
UNIX system by the TFTP server. It is critical that you work with your
system administrator to plan the naming conventions for directories,
filenames, and permissions so that anyone using the system has read and
write permissions.
December 2001
Configuration Loader
CONFIGURATION LOADER
000.000.000.000
Download from Server
DSL
Yes
0000000
0000000
0000000
0000000
Transfer Pending
3. Initial Startup and Configuration
Model: 797x
Clear
Clear
MainMenu Exit
3-11